Please Try Adding 39d Megaraid N 39 Extra Quality __full__ — Smartctl Open Device Dev Sda Failed Dell Or Megaraid Controller

for pd in 0..15; do smartctl -H -d megaraid,$pd /dev/sda &>/dev/null; if [ $? -eq 0 ]; then echo "PD $pd OK"; else echo "PD $pd missing or error"; fi; done

When the operating system reads /dev/sda , it is interacting with an emulated, unified virtual drive, not a physical piece of silicone or spinning media. for pd in 0

(Note: This only works if the controller is in JBOD/HBA pass-through mode rather than a hardware RAID array). For many systems with a single RAID volume,

For many systems with a single RAID volume, the command that works is: Run smartctl --scan to see a list of

smartctl -d megaraid,0 /dev/sda

Discard the string 39d megaraid n 39 extra quality . It is gibberish caused by transcription errors. Use the corrected command syntax provided above.

Run smartctl --scan to see a list of attached devices and their corresponding IDs.