Hb Atv 125 Service Manual

Turn the brass mixture screw inward until lightly seated, then back it out 1.5 to 2 full turns as a baseline starting point. Valve Clearance Adjustment

Every 20–30 hours of operation or every 3 months. Spark Plug Specifications Standard Plug: NGK C7HSA (or equivalent torch A7TC). Spark Plug Gap: 0.6 mm – 0.7 mm (0.024 in – 0.028 in). Tightening Torque: 12 Nm (8.8 ft-lbs). Fuel System hb atv 125 service manual

Loosen the rear axle carrier locking bolts. Turn the adjuster nuts on the back of the swingarm evenly to slide the axle back (to tighten) or forward (to loosen). Turn the brass mixture screw inward until lightly

Turn off the fuel valve (petcock) and disconnect the fuel line. Spark Plug Gap: 0

Without the manual, you might have replaced the CDI, coil, and plug unnecessarily. With the manual, you find the stator is faulty in 20 minutes and replace only that part.