| Segment | Operation | |---------|-----------| | 1 | Ramp from room temperature to 1250 °F at 300 °F/hour | | 2 | Hold at 1250 °F for 30 minutes | | 3 | Ramp to 1420 °F at 300 °F/hour | | 4 | Hold at 1420 °F for 30–60 minutes (soak) | | 5 | Ramp as fast as possible down to 960 °F | | 6 | Hold at 960 °F for 90 minutes | | 7 | Ramp to 800 °F at 50 °F/hour (no hold) | | 8 | Ramp to 600 °F at 100 °F/hour, then turn off and allow natural cooling |
A: Refer to the "Cone-Fire" or equivalent mode section in your controller's manual. You will generally select the cone number (e.g., Cone 04, Cone 6). The controller will then use a built-in table to automatically program the correct ramp rates and target temperatures. evenheat kiln model 5320 manual
Ensure the kiln stand is sturdy. If the kiln has a metal bottom, ensure the stand does not block any structural screws. | Segment | Operation | |---------|-----------| | 1
Because Evenheat makes many models, it is crucial to use the specific manual for your model. Ensure the kiln stand is sturdy