Understanding the underlying hardware architecture is essential before modifying basic input/output system (BIOS) variables: : Intel LGA 1155 interface.
Turn off the computer, unplug the power cable, open the side panel, locate the silver coin battery on the motherboard, and replace it with a fresh CR2032 battery. Re-enter the BIOS to configure your settings one final time. Issue 4: Bricked Motherboard (Failed Flash) Samsung B75s1 Bios
SATA 3.0 (6Gb/s) ports managed via AHCI/IDE protocols in the BIOS. Issue 4: Bricked Motherboard (Failed Flash) SATA 3
Always check this setting before installing a new operating system, especially if you are upgrading from an older mechanical hard drive to a solid-state drive (SSD). Advanced > SATA Configuration Setting: Change from IDE to AHCI . Navigate to the tab and ensure USB Wake-up
Navigate to the tab and ensure USB Wake-up Support is enabled.